Figuring out how to go about this process quickly became an irresistible challenge. An extra step or two had to be added in order to do the job right. Did it save time in the long run? Yes, but not as much as I'd hoped.
The instructions shown here are for a set of four place mats. I made two sets.
Place Mats: 14" x 18"
Use 1/4" seam allowances.
Fabrics needed for four place mats
- 1/2 yard inner background fabric
- 1/4 yard or one fat quarter contrast fabric for narrow, inner border
- 2/3 yard coordinating or contrast fabric for wider, outer border
- 1 yard backing
- 1 yard batting
Cutting for four place mats
From inner background cut:
- four rectangles, 10" x 14"
- eight strips, 3/4" x 10"
- eight strips, 3/4" x 14 1/2"
- eight strips, 2 1/2" x 10 1/2"
- eight strips, 2 1/2" x 18 1/2"
- four rectangles, 15 1/2" x 19 1/2"
- four rectangles, 15 1/2" x 19 1/2"
1. Position the tree from on the 14" x 10" background fabric. Fuse and stitch in place with a machine zigzag stitch.
Instructions for making the trees are found in last week's blog post. Christmas Placemats, Part 1
3. Sew a 3/4" x 14 12" strip of narrow binding to the top and the bottom of the background fabric. Press.
Strip piecing makes the process quick. |
5. Sew a 2 1/2" x 18 1/2" strip of outer border fabric to the top and to the bottom of the quilt top. Press seams to the border.
To make place mats with binding, add the batting and backing at this point, quilt, and bind.
The following instructions are for making the place mats without binding.
1. With a removable fabric marker and a ruler, draw a line all around the outer border of the place mat top. Make the line 5/8" in from the edge of the border.
2. Center the place mat top right side up on a 15" x 19" piece of batting. Pin in place.
3. Stitch in the ditch on one side of the narrow, inner border. This will hold the batting securely in place under the place mat top.
3. Stitch on the line with a very long machine stitch to baste the place mat top to the batting.
4. Trim the batting to 1/4" beyond the edge of the basting stitch.
The edge of a cutting ruler can be used to flip the edge over so that the batting can easily be trimmed to 1/4" |
7. Stitch together, 1/4" from the edge of the place mat top. Leave an opening of about 4" on one side of the place mat for turning.
8. Trim off the excess lining and pull through the opening to turn the place mat right sides out.
I use a large knitting needle to poke the corners out, then I smooth the seam open with the needle, pressing it flat as I go. |
10. Sew very close to the edge all around the place mat enclosing the opening at the same time.
Simple, straight line stitching on the outer border. |
Quilting around the tree with a walking foot. |
Drawing the quilting lines with my removable marker. |
I'm so ready to move on to other things. The last two months have been so disrupted with health issues that I decided not to try sewing Christmas gifts this year. I've ordered everything online, instead.
The place mats were the first thing I'd made just for myself in quite awhile. It felt good to be sewing for me. I think I'll sew myself something else. Let's see .... I need a new robe, a pretty spring table cloth, everyday place mats, a cozy lap quilt ... Well, maybe not all at once.
Wishing you a very happy December!